4Runner/Tacoma Tapered Differential Drop Kit:$45.00 + $6.80 USPS

$51.80

Originally the spacers were cut out of a 2 1/4" wide puck of solid steel. This puck matched the size of the bushing. After cutting my truck up during the Dana 44 conversion, the frame section has a sleeve that supports sleeves in the front differentials leading two bushings. We have re-designed this part, instead of covering the bushings which is not necessary, we now simply extend the frame sleeve down 1" with a taper at one end.
The new spacers are easier to make so a 33% price reduction was implemented. The new spacers are cut from 1/4" wall DOM (drawn over mandrel) tube, which means they have no welded seam. These spacers are considerably thicker and beefier than the frame sleeves. The spacers are marked with a dot for the top and front, this ensures that you will install them correctly and orient the taper in the correct direction.

Included:

(4)-M8 bolts to aid the the re-fitment of the stock skid in the stock un-lowered position.
(2)-spacers
(2)-Grade 8 fine thread bolts
(2)-Fine thread stover nuts
(4)-Washers.

The spacers themselves will be painted black with Rustoleum hammered when you receive them.


Applications: 1996-2002 Toyota 4Runner, 1995.5-2004 Toyota Tacoma and 2000-2006 Toyota Tundra

USPS Rate is for USA ONLY! International will be actual cost of Postage.




Quantity:

 
Copyright © 2017 Sonoran Steel. Powered by Zen Cart
Photo Album New Mexico Backroads - Jake Quinones Radflo