1996-2002 - System 1.2 Rebuildable 2.0 or 2.5

Starting at: $1,492.00

The kit with the best "Pure Off-Road Prowess Bar None".  Fire the BOSS, he can't make it up the Wall at Poughkeepsie Gulch!
Adjustable 1.5"-3.5" Front & 3.5-4.5" Rear. Lift height depends on model year.
4WD Only.

This kit modernizes the 3rd Gen 4Runner. The 4th Gen 4Runner 2003-2009 was 2" higher in the rear than the front to combat sagging. The 5th Gen 4Runner is as well, 2" higher in the rear then the front, like a pickup truck. These vehicles were made by Toyota this way. The 1.2 kit will build a 3rd Gen 4Runner with a rear that is 1.5" higher in the rear for cargo carrying capability without sagging. This kit can be run on a bone stock truck or on a vehicle with custom bumpers. The kit is adjustable with out buying new parts to accommodate the changes.

The rear coils are brand new, the are made of a small diameter wire with wide wraps. They will require some time to settle to the final height. All of the data for this lift kit was compiled with springs that had between 40K and 100K miles on them. These coils will hold out for an extremely long time, but are tall when brand new, plan on some settling after install. This is not the case with the front coils, those consist of a large diameter wire with tight wraps, they will not change after install.

Turn around 2-4 weeks depending on how fast the front "Hand Made" shocks are assembled. Varies depending on the season.

2001-2002 will need a second rear brake line, that is an additional $35.00. We will invoice you for the second line if you have one of those model years.

Upgrade front 2.0 to 2.5 for $240. 5000 pounds is the break line for 2.0 versus 2.5 shocks. If you are at or over 5000, run 2.5. Under 5000 run 2.0. The rear Tokico will hang just fine with the 2.5 and weight over 5000.

Front:
(2)-Radflo 2.0 or 2.5 Adjustable Coil Overs
(1)-Radflo Spanner Wrench
(2)-Sonoran Steel Fabrication L.L.C. Front Differential Drop Spacers
(4)-Toyota Bushings
(2)-Toyota M10 Stover Nuts

Rear:
(2)-Toyota 80 Series Land Cruiser Coils
(2)-Genuine Toyota Tokico Black Rear Shocks & Supporting Hardware
(1)-Sonoran Steel Fabrication L.L.C. Adjustable Trac/PanHard Bar
(2)-Sonoran Steel Fabrication L.L.C. Extended Bump Stop Adapters with
(2)-Daystar "Competition Style" Bump Stops
(2)-Sonoran Steel Fabrication L.L.C. Rear Sway Bar Adjustment Brackets
(1)-Sonoran Steel Fabrication L.L.C. Braided Stainless Steel Extended Brake Line
(1)-Sonoran Steel Fabrication L.L.C. Parking/Emergency Brake Bracket

Install Guide


  • Manufactured by: Radflo

Please Choose:

Additional Options




Quantity:

 
Copyright © 2017 Sonoran Steel. Powered by Zen Cart
Photo Album New Mexico Backroads - Jake Quinones Radflo