A very nice 100% bolt on replacement for the stock tow hook and tie down rings.

One side cut out, the other still need to be cut and grinded.

One side is cut out and the other side is still in the raw stock form.  You can see here that the 1/4" thick 2" square tube needed to be cut open and the 1" stock needed to be rounded and a 1" hole drilled.

All of the pieces cut out and grinded into shape.  Waiting to be welded.

Just after welding.

Mounts after being welded.  An extra 1/2" grade 8 bolt is on each piece for extra strength.

Mounts all done and painted.  They are bolted with a 1/2" grade 8 bolt just in case.

Mount and Warn 3/4" Shackle in place.

Front of the 4Runner with the shackles installed.

Front passenger side tow hook was moved to the rear drivers side.  All of the stock bolts are re-used.  The two bolts removed from the rear are now used on the front where the stock hook was.  A pair of these hangers will also fit the rear if you do not have a trailer hitch.