This product is 100% bolt on and requires no welding or frame modifications what so ever. You are required to send your stock bar back in to us to recover a core charge. All of the benefits listed in the drop bracket section apply to this product as well, the same results are achieved with the longer bar as are with the drop bracket.
Applications:
This Trac/PanHard drop bar will fit:
1990-1995 Toyota 4Runners with 3-4" of rear lift, 3.5" drop bar.
 |
 |
| 90-95 Drop and Stock bars | 3.5" Drop Bar installed, 90-95 |
Here you can also see where this started with the 96-02 4Runner drop bar which is now discontinued in favor of the fully adjustable Trac/Panhard Bar. The 90-95 4Runner can not use an adjustable bar due to the LSPV rear brake valve. Pictures below are to show where we started and where we have gone.
 |
 |
 |
 |
|
96-02 Drop Trac/PanHard Bar |
Originally we re-used stock ends, now the bars are built from scratch. | 96-02 Drop and Stock bars |
2.5" Drop Bar installed, 96-02 |
1990 to 1995 4Runner: Trac/PanHard Drop Bar: $150.00 PLUS your stock bar as a core. $150.00 core charge upfront which will be immediately refunded to you once you send your stock bar into us. If your stock bar is covered in rust and we can not send to someone else in "good faith" you will have to notify us in advance and we will look into a non rusted or brand new core for you. This is not an opportunity to dump a rusty bar on someone else.
Back to www.sonoransteel.com
e-mail me: steve@sonoransteel.com